ExplainerTesting Science2024

Endotoxin explained

What endotoxin is, why ordinary sterile filtration does not remove it, and how the LAL test measures it.

Endotoxin explained
Key findings
  • Endotoxin is lipopolysaccharide from the outer membrane of Gram-negative bacteria, released when bacteria die
  • It is not removed by ordinary sterile filtration, so a sterile product can still be pyrogenic
  • Measured by kinetic chromogenic LAL per USP <85>, reported in EU per mg
  • A positive product control (spike recovery, commonly 50-200%) proves the sample is not masking the result

Endotoxin is the name given to lipopolysaccharide — a large molecule that sits in the outer membrane of Gram-negative bacteria. It is not the bacterium itself. It is a piece of the bacterium, and it is released when those bacteria die or break apart. That matters because it means a sample can have no living bacteria left and still be dangerous: the bacteria are gone, but the endotoxin they shed remains.

This is why endotoxin is a separate concern from sterility. Sterile filtration removes whole cells. It does not remove endotoxin, because endotoxin is a dissolved molecule, not a particle. A product can be perfectly sterile (no viable microorganisms) and still be pyrogenic — meaning it can cause fever and chills, and at high enough levels a severe inflammatory reaction. For anything injected, that is the risk endotoxin testing exists to catch.

We measure endotoxin by the kinetic chromogenic LAL method per USP <85>. LAL stands for Limulus amebocyte lysate, a reagent derived from the blood cells of the horseshoe crab, which clots in the presence of endotoxin. In the kinetic chromogenic version, a color change is tracked over time, and the rate of that change is proportional to the endotoxin concentration. The result is reported in endotoxin units per milligram — EU per mg — so that products of different strengths can be compared on the same scale.

One detail separates a trustworthy endotoxin result from an untrustworthy one: the positive product control. Some samples interfere with the assay — they can enhance or inhibit the color reaction, making a high sample read low or a low sample read high. A positive product control is a spike: a known amount of endotoxin added to the sample. If the assay reads that spike back correctly (within the accepted recovery window, commonly 50 to 200%), it proves the sample is not masking the result. If the spike does not recover, the result is not reliable and the sample has to be handled differently before it can be reported.

The connection to real-world failures is direct. In the 2024 study of online semaglutide, one of the three samples that arrived showed elevated endotoxin — an injectable-form product carrying the exact contaminant endotoxin testing is designed to find. Purity and content were also off in that study, but endotoxin was the safety failure, and it is the one a purity number cannot reveal.

So on a certificate of analysis for an injectable, endotoxin is not optional. It should report EU per mg, the method (USP <85>), and the positive product control recovery that proves the measurement was not masked.

Cites: Ashraf et al. JAMA Network Open 2024.

Educational information only. Not medical advice. USA Prime Labs tests research materials for research use only; nothing here is intended for human or veterinary use. Talk to a licensed health care provider about any medical decision.
Related articles
USA Prime Labs
USAPRIME LABS
We test the research before you do

We test the research before you do. Identity, purity, content, endotoxin, metals, sterility — verified on one certificate you can check by QR.

All testing is performed on research materials for research use only. Not for human consumption. Results describe the sample as received and do not constitute medical, clinical, or safety advice.

© 2026 USA Prime Labs. Research use only — not for human consumption.Part of the USA Prime family.