Standards
The compendial standards our methods follow. Each test on the Tests page links to the standard it is built on.
Microbial Enumeration Tests
Counts viable aerobic microorganisms in a sample, reported as TAMC and TYMC in CFU. This is a bioburden count, not a sterility claim.
Tests for Specified Microorganisms
Detects particular objectionable microorganisms in a sample.
Sterility Tests
A 14-day pass/fail test that incubates the sample in two media to look for any growth. A sterility claim rests on this test, not on a count.
Bacterial Endotoxins Test
Measures endotoxin by the kinetic chromogenic LAL method, reported in EU per mg. A positive product control shows the sample is not masking the result.
Pyrogen Test
An older rabbit-based pyrogen test; the LAL endotoxin test is the modern, more sensitive alternative for most products.
Elemental Impurities — Limits
Sets permitted daily exposure limits for elemental impurities including arsenic, cadmium, lead and mercury.
Elemental Impurities — Procedures
The analytical procedure (commonly ICP-MS) for measuring elemental impurities against the USP <232> limits.
Residual Solvents
Identifies and quantifies residual solvents such as acetonitrile, DMF and ethanol against safety limits, typically by headspace GC-MS.
Chromatography
The general chapter governing chromatographic methods, including the reversed-phase HPLC used for purity and content work.
Water Determination
Methods for measuring water content, including Karl Fischer titration, reported as percent by weight.
Validation of Compendial Procedures
The criteria for validating an analytical method — specificity, accuracy, precision, linearity, range and limit of quantitation.
Analytical Validation
The international guideline on validating analytical procedures, aligned with the USP <1225> principles.
Residual Solvents
The international guideline classifying residual solvents by risk and setting exposure limits, aligned with USP <467>.
Elemental Impurities
The international guideline on elemental impurities, aligned with the USP <232> limits.
