Research Library

Glossary

Plain-language definitions for the testing terms used across the Research Library and our certificates.

API

Active pharmaceutical ingredient — the molecule responsible for the intended effect, as distinct from impurities or excipients.

Aggregate

A clump of peptide molecules stuck together. Aggregates are a concern because they can raise immunogenicity risk.

Bioburden

The total number of viable microorganisms on or in a product before sterilization, reported as a count.

CFU

Colony-forming unit — a count of living microbes estimated by the number of colonies that grow on a plate.

Chain of custody

The documented record of who handled a sample, when, and under what conditions, from receipt to report.

Chromatogram

The visual output of a chromatography run — a plot of detector response over time, with peaks for each separated component.

COA

Certificate of analysis — the document reporting the tests run on a sample and their results against specifications.

Compounding (503A and 503B)

FDA categories for compounding pharmacies. 503A covers traditional compounding under a prescription; 503B covers outsourcing facilities with more federal oversight.

Deletion sequence

An impurity peptide that is missing one or more amino acids compared with the intended sequence.

Endotoxin

Lipopolaccharide from the outer membrane of Gram-negative bacteria, released when the bacteria die. Pyrogenic.

EU (endotoxin unit)

The unit of measure for endotoxin activity used in the LAL test.

Falsified vs substandard

A falsified product deliberately misrepresents identity, composition or source; a substandard product fails its quality specifications, often from poor manufacturing.

GC-MS

Gas chromatography coupled to mass spectrometry — used to separate, identify and quantify residual solvents.

Heavy metals

Toxic elemental impurities such as arsenic, cadmium, lead and mercury, measured against permitted limits.

HPLC

High-performance liquid chromatography — separates a mixture so the share of the main component (purity) can be measured.

ICP-MS

Inductively coupled plasma mass spectrometry — used to measure elemental impurities at very low levels.

Identity test

A test that confirms the molecule is what the label says it is, for example by mass spectrometry.

Immunogenicity

The tendency of a substance to provoke an unwanted immune response, which can include severe reactions.

Karl Fischer

A titration method used to measure water content, reported as percent by weight.

LAL

Limulus amebocyte lysate — the reagent used in the bacterial endotoxin test, made from horseshoe crab blood cells.

LC-MS

Liquid chromatography coupled to mass spectrometry — used to confirm a molecule's identity by its mass and to quantify it.

Limit of quantitation

The lowest amount of a substance that can be measured with acceptable accuracy and precision.

Lot

A defined batch of material produced under uniform conditions, identified by a lot or batch number.

Lyophilized

Freeze-dried — a solid powder form produced by removing water from a frozen solution under vacuum.

Mass spectrometry

A technique that measures the mass of molecules and fragments to identify and confirm them.

Net peptide content

The actual mass of the peptide itself in a vial, as distinct from water, salts and other non-peptide material.

ND (not detected)

A result reported when a substance is below the limit the method can detect.

Positive product control

A spiked sample used to prove the test sample itself is not masking (enhancing or inhibiting) the endotoxin result.

ppm

Parts per million — a concentration unit equal to one part in a million, used for trace impurities.

Purity

The share of the main component relative to everything detected, commonly reported as the main peak's percent of total peak area.

Pyrogen

A substance that can cause fever; endotoxin is a common pyrogen of concern for injectable products.

Reference standard

A well-characterized material of known purity used as a comparison to quantify a test sample.

Residual solvents

Solvents left over from manufacturing, such as acetonitrile, DMF or ethanol, measured against safety limits.

Retention time

The time a component takes to pass through a chromatography column, used to help identify it.

Spike recovery

The percentage of a known added amount measured back by the method, used to show the sample is not interfering.

Sterility

The absence of viable microorganisms — a claim supported only by a proper sterility test, not by a count.

TAMC

Total aerobic microbial count — the number of aerobic microbes recovered, in CFU.

TYMC

Total yeasts and molds count — the number of yeasts and molds recovered, in CFU.

USP

United States Pharmacopeia — the compendium of public standards for medicines and tests.

Validation

The documented process of proving an analytical method does what it is intended to do, reliably.

USA Prime Labs
USAPRIME LABS
We test the research before you do

We test the research before you do. Identity, purity, content, endotoxin, metals, sterility — verified on one certificate you can check by QR.

All testing is performed on research materials for research use only. Not for human consumption. Results describe the sample as received and do not constitute medical, clinical, or safety advice.

© 2026 USA Prime Labs. Research use only — not for human consumption.Part of the USA Prime family.